Your search:
10 result(s) in 0.21 s
-
DUKAS_189534611_FER
Wearable motorcycle
Ferrari Press Agency
Bike suit 1
Ref 17177
02/10/2025
See Ferrari text
Picture MUST credit: Jake Carlini
An inventor has hit the road — at the wheel of a wearable motorcycle.
US born Jake Carlini, 32, repurposed bike parts that enable him to ride in a planking position with his nose just a few centimetres above the road surface.
He built the outfit from salvaged parts after crashing his own electric bike.
The first step was salvaging the motor, which was built into the rear wheel.
YouTube creator Carlini attached it directly to his legs using painter’s stilt straps as braces.
These straps held the wheel forks against his shins, allowing him to lock his legs into the motor assembly.
He used the old electric bike’s battery to power the wheel by putting it in the back pocket of a protective vest.
The front-wheel wheel fits in a frame with a pair of handles and armrest pads.
Electronics from the bike, including the throttle and display, were transferred to the suit.
The throttle is mounted on the right handlebar for acceleration control, while the display is hidden but accessible for checking power and speed.
During testing, Carlini admitted the suit needed strong core muscles to balance.
OPS: Jake Carlini takes his wearable motorcycle out for a spin
Picture supplied by Ferrari
(FOTO: DUKAS/FERRARI PRESS) -
DUKAS_189534610_FER
Wearable motorcycle
Ferrari Press Agency
Bike suit 1
Ref 17177
02/10/2025
See Ferrari text
Picture MUST credit: Jake Carlini
An inventor has hit the road — at the wheel of a wearable motorcycle.
US born Jake Carlini, 32, repurposed bike parts that enable him to ride in a planking position with his nose just a few centimetres above the road surface.
He built the outfit from salvaged parts after crashing his own electric bike.
The first step was salvaging the motor, which was built into the rear wheel.
YouTube creator Carlini attached it directly to his legs using painter’s stilt straps as braces.
These straps held the wheel forks against his shins, allowing him to lock his legs into the motor assembly.
He used the old electric bike’s battery to power the wheel by putting it in the back pocket of a protective vest.
The front-wheel wheel fits in a frame with a pair of handles and armrest pads.
Electronics from the bike, including the throttle and display, were transferred to the suit.
The throttle is mounted on the right handlebar for acceleration control, while the display is hidden but accessible for checking power and speed.
During testing, Carlini admitted the suit needed strong core muscles to balance.
OPS: Jake Carlini takes his wearable motorcycle out for a spin
Picture supplied by Ferrari
(FOTO: DUKAS/FERRARI PRESS) -
DUKAS_189534609_FER
Wearable motorcycle
Ferrari Press Agency
Bike suit 1
Ref 17177
02/10/2025
See Ferrari text
Picture MUST credit: Jake Carlini
An inventor has hit the road — at the wheel of a wearable motorcycle.
US born Jake Carlini, 32, repurposed bike parts that enable him to ride in a planking position with his nose just a few centimetres above the road surface.
He built the outfit from salvaged parts after crashing his own electric bike.
The first step was salvaging the motor, which was built into the rear wheel.
YouTube creator Carlini attached it directly to his legs using painter’s stilt straps as braces.
These straps held the wheel forks against his shins, allowing him to lock his legs into the motor assembly.
He used the old electric bike’s battery to power the wheel by putting it in the back pocket of a protective vest.
The front-wheel wheel fits in a frame with a pair of handles and armrest pads.
Electronics from the bike, including the throttle and display, were transferred to the suit.
The throttle is mounted on the right handlebar for acceleration control, while the display is hidden but accessible for checking power and speed.
During testing, Carlini admitted the suit needed strong core muscles to balance.
OPS: Jake Carlini takes his wearable motorcycle out for a spin
Picture supplied by Ferrari
(FOTO: DUKAS/FERRARI PRESS) -
DUKAS_189534608_FER
Wearable motorcycle
Ferrari Press Agency
Bike suit 1
Ref 17177
02/10/2025
See Ferrari text
Picture MUST credit: Jake Carlini
An inventor has hit the road — at the wheel of a wearable motorcycle.
US born Jake Carlini, 32, repurposed bike parts that enable him to ride in a planking position with his nose just a few centimetres above the road surface.
He built the outfit from salvaged parts after crashing his own electric bike.
The first step was salvaging the motor, which was built into the rear wheel.
YouTube creator Carlini attached it directly to his legs using painter’s stilt straps as braces.
These straps held the wheel forks against his shins, allowing him to lock his legs into the motor assembly.
He used the old electric bike’s battery to power the wheel by putting it in the back pocket of a protective vest.
The front-wheel wheel fits in a frame with a pair of handles and armrest pads.
Electronics from the bike, including the throttle and display, were transferred to the suit.
The throttle is mounted on the right handlebar for acceleration control, while the display is hidden but accessible for checking power and speed.
During testing, Carlini admitted the suit needed strong core muscles to balance.
OPS: Jake Carlini takes his wearable motorcycle out for a spin
Picture supplied by Ferrari
(FOTO: DUKAS/FERRARI PRESS) -
DUKAS_189534607_FER
Wearable motorcycle
Ferrari Press Agency
Bike suit 1
Ref 17177
02/10/2025
See Ferrari text
Picture MUST credit: Jake Carlini
An inventor has hit the road — at the wheel of a wearable motorcycle.
US born Jake Carlini, 32, repurposed bike parts that enable him to ride in a planking position with his nose just a few centimetres above the road surface.
He built the outfit from salvaged parts after crashing his own electric bike.
The first step was salvaging the motor, which was built into the rear wheel.
YouTube creator Carlini attached it directly to his legs using painter’s stilt straps as braces.
These straps held the wheel forks against his shins, allowing him to lock his legs into the motor assembly.
He used the old electric bike’s battery to power the wheel by putting it in the back pocket of a protective vest.
The front-wheel wheel fits in a frame with a pair of handles and armrest pads.
Electronics from the bike, including the throttle and display, were transferred to the suit.
The throttle is mounted on the right handlebar for acceleration control, while the display is hidden but accessible for checking power and speed.
During testing, Carlini admitted the suit needed strong core muscles to balance.
OPS: Jake Carlini takes his wearable motorcycle out for a spin
Picture supplied by Ferrari
(FOTO: DUKAS/FERRARI PRESS) -
DUKAS_189534606_FER
Wearable motorcycle
Ferrari Press Agency
Bike suit 1
Ref 17177
02/10/2025
See Ferrari text
Picture MUST credit: Jake Carlini
An inventor has hit the road — at the wheel of a wearable motorcycle.
US born Jake Carlini, 32, repurposed bike parts that enable him to ride in a planking position with his nose just a few centimetres above the road surface.
He built the outfit from salvaged parts after crashing his own electric bike.
The first step was salvaging the motor, which was built into the rear wheel.
YouTube creator Carlini attached it directly to his legs using painter’s stilt straps as braces.
These straps held the wheel forks against his shins, allowing him to lock his legs into the motor assembly.
He used the old electric bike’s battery to power the wheel by putting it in the back pocket of a protective vest.
The front-wheel wheel fits in a frame with a pair of handles and armrest pads.
Electronics from the bike, including the throttle and display, were transferred to the suit.
The throttle is mounted on the right handlebar for acceleration control, while the display is hidden but accessible for checking power and speed.
During testing, Carlini admitted the suit needed strong core muscles to balance.
OPS: Jake Carlini takes his wearable motorcycle out for a spin
Picture supplied by Ferrari
(FOTO: DUKAS/FERRARI PRESS) -
DUKAS_189534605_FER
Wearable motorcycle
Ferrari Press Agency
Bike suit 1
Ref 17177
02/10/2025
See Ferrari text
Picture MUST credit: Jake Carlini
An inventor has hit the road — at the wheel of a wearable motorcycle.
US born Jake Carlini, 32, repurposed bike parts that enable him to ride in a planking position with his nose just a few centimetres above the road surface.
He built the outfit from salvaged parts after crashing his own electric bike.
The first step was salvaging the motor, which was built into the rear wheel.
YouTube creator Carlini attached it directly to his legs using painter’s stilt straps as braces.
These straps held the wheel forks against his shins, allowing him to lock his legs into the motor assembly.
He used the old electric bike’s battery to power the wheel by putting it in the back pocket of a protective vest.
The front-wheel wheel fits in a frame with a pair of handles and armrest pads.
Electronics from the bike, including the throttle and display, were transferred to the suit.
The throttle is mounted on the right handlebar for acceleration control, while the display is hidden but accessible for checking power and speed.
During testing, Carlini admitted the suit needed strong core muscles to balance.
OPS: Jake Carlini takes his wearable motorcycle out for a spin
Picture supplied by Ferrari
(FOTO: DUKAS/FERRARI PRESS) -
DUKAS_189534604_FER
Wearable motorcycle
Ferrari Press Agency
Bike suit 1
Ref 17177
02/10/2025
See Ferrari text
Picture MUST credit: Jake Carlini
An inventor has hit the road — at the wheel of a wearable motorcycle.
US born Jake Carlini, 32, repurposed bike parts that enable him to ride in a planking position with his nose just a few centimetres above the road surface.
He built the outfit from salvaged parts after crashing his own electric bike.
The first step was salvaging the motor, which was built into the rear wheel.
YouTube creator Carlini attached it directly to his legs using painter’s stilt straps as braces.
These straps held the wheel forks against his shins, allowing him to lock his legs into the motor assembly.
He used the old electric bike’s battery to power the wheel by putting it in the back pocket of a protective vest.
The front-wheel wheel fits in a frame with a pair of handles and armrest pads.
Electronics from the bike, including the throttle and display, were transferred to the suit.
The throttle is mounted on the right handlebar for acceleration control, while the display is hidden but accessible for checking power and speed.
During testing, Carlini admitted the suit needed strong core muscles to balance.
OPS: Jake Carlini takes his wearable motorcycle out for a spin
Picture supplied by Ferrari
(FOTO: DUKAS/FERRARI PRESS) -
DUKAS_189534603_FER
Wearable motorcycle
Ferrari Press Agency
Bike suit 1
Ref 17177
02/10/2025
See Ferrari text
Picture MUST credit: Jake Carlini
An inventor has hit the road — at the wheel of a wearable motorcycle.
US born Jake Carlini, 32, repurposed bike parts that enable him to ride in a planking position with his nose just a few centimetres above the road surface.
He built the outfit from salvaged parts after crashing his own electric bike.
The first step was salvaging the motor, which was built into the rear wheel.
YouTube creator Carlini attached it directly to his legs using painter’s stilt straps as braces.
These straps held the wheel forks against his shins, allowing him to lock his legs into the motor assembly.
He used the old electric bike’s battery to power the wheel by putting it in the back pocket of a protective vest.
The front-wheel wheel fits in a frame with a pair of handles and armrest pads.
Electronics from the bike, including the throttle and display, were transferred to the suit.
The throttle is mounted on the right handlebar for acceleration control, while the display is hidden but accessible for checking power and speed.
During testing, Carlini admitted the suit needed strong core muscles to balance.
OPS: Jake Carlini
Picture supplied by Ferrari
(FOTO: DUKAS/FERRARI PRESS) -
DUKAS_189534602_FER
Wearable motorcycle
Ferrari Press Agency
Bike suit 1
Ref 17177
02/10/2025
See Ferrari text
Picture MUST credit: Jake Carlini
An inventor has hit the road — at the wheel of a wearable motorcycle.
US born Jake Carlini, 32, repurposed bike parts that enable him to ride in a planking position with his nose just a few centimetres above the road surface.
He built the outfit from salvaged parts after crashing his own electric bike.
The first step was salvaging the motor, which was built into the rear wheel.
YouTube creator Carlini attached it directly to his legs using painter’s stilt straps as braces.
These straps held the wheel forks against his shins, allowing him to lock his legs into the motor assembly.
He used the old electric bike’s battery to power the wheel by putting it in the back pocket of a protective vest.
The front-wheel wheel fits in a frame with a pair of handles and armrest pads.
Electronics from the bike, including the throttle and display, were transferred to the suit.
The throttle is mounted on the right handlebar for acceleration control, while the display is hidden but accessible for checking power and speed.
During testing, Carlini admitted the suit needed strong core muscles to balance.
OPS: Jake Carlini with the wrecked electric bike he used to help make the suit.
Picture supplied by Ferrari
(FOTO: DUKAS/FERRARI PRESS)