Ihre Suche nach:
559 Ergebnis(se) in 0.02 s
-
DUKAS_194682331_POL
US Military drones
Oregon Air National Guard Master Sgt. Brant Vogelsang, a drone instructor, prepares to launch an AeroVironment RQ-20 Puma drone during a flight and capabilities demonstration alongside members of the People’s Army of Vietnam in Quang Tri, Vietnam, Sept. 12, 2025. The exchange enhanced the two partners’ shared understanding of how to implement sUAS platforms into Humanitarian Assistance and Disaster Relief response efforts both locally and throughout the larger Indo-Pacific region. Pacific Friendship 2025 is an inaugural-annual exchange led by United States Army Pacific and represented by the U.S. Army’s 18th Theater Medical Command. The engagement reinforces the longstanding relationship between Vietnam and the United States, and includes Humanitarian Assistance and Disaster Relief, medical, civil affairs, and engineering lines of effort, which directly enhance the quality of life of Vietnamese citizens while helping the greater region prepare for manmade and historically-unpredictable natural disasters. (POLARIS) (FOTO:DUKAS/POLARIS)
Public Domain -
DUKAS_194544360_ZUM
Medal Of Honor Ceremony At The White House
March 2, 2026, Washington, Dc, United States: U.S. President DONALD TRUMP speaks about Iran before a Medal of Honor ceremony in the East Room of the White House. (Credit Image: © Andrew Leyden/ZUMA Press Wire (FOTO: DUKAS/ZUMA)
Represented by ZUMA Press, Inc. -
DUKAS_182764778_POL
'The Alto Knights' premieres in NYC
March 15, 2025 - New York, New York, United States: Film's director Barry Levinson attends arrivals. (Michael Sherer/Polaris) (FOTO:DUKAS/POLARIS)
Michael Sherer -
DUKAS_182650667_EYE
Deputy Prime Minister Angela Rayner welcomes the First Deputy Prime Minister of Vietnam to Westminster
18/03/2025. London. The Deputy Prime Minister Angela Rayner welcomes the First Deputy Prime Minister of Vietnam, Nguy?n Hoà Bình, along with the ?Ambassador to the United Kingdom of Great Britain and Northern Ireland His Excellency Do Minh Hung, Vice Chairman of the Government Office Mai Thi Thu Van, Deputy Foreign Minister Le Thi Thu Hang and Deputy Minister of Ministry of Justice Nguyen Thanh Tinhto, to Westminster. Picture by Simon Walker / Deputy Prime Minister's Office / eyevine
Contact eyevine for more information about using this image:
T: +44 (0) 20 8709 8709
E: info@eyevine.com
http://www.eyevine.com
(FOTO: DUKAS/EYEVINE)
Crown copyright. Licensed under the Open Government Licence -
DUKAS_182650651_EYE
Deputy Prime Minister Angela Rayner welcomes the First Deputy Prime Minister of Vietnam to Westminster
18/03/2025. London. The Deputy Prime Minister Angela Rayner welcomes the First Deputy Prime Minister of Vietnam, Nguy?n Hoà Bình, along with the ?Ambassador to the United Kingdom of Great Britain and Northern Ireland His Excellency Do Minh Hung, Vice Chairman of the Government Office Mai Thi Thu Van, Deputy Foreign Minister Le Thi Thu Hang and Deputy Minister of Ministry of Justice Nguyen Thanh Tinhto, to Westminster. Picture by Simon Walker / Deputy Prime Minister's Office / eyevine
Contact eyevine for more information about using this image:
T: +44 (0) 20 8709 8709
E: info@eyevine.com
http://www.eyevine.com
(FOTO: DUKAS/EYEVINE)
Crown copyright. Licensed under the Open Government Licence -
DUKAS_182650663_EYE
Deputy Prime Minister Angela Rayner welcomes the First Deputy Prime Minister of Vietnam to Westminster
18/03/2025. London. The Deputy Prime Minister Angela Rayner welcomes the First Deputy Prime Minister of Vietnam, Nguy?n Hoà Bình, along with the ?Ambassador to the United Kingdom of Great Britain and Northern Ireland His Excellency Do Minh Hung, Vice Chairman of the Government Office Mai Thi Thu Van, Deputy Foreign Minister Le Thi Thu Hang and Deputy Minister of Ministry of Justice Nguyen Thanh Tinhto, to Westminster. Picture by Simon Walker / Deputy Prime Minister's Office / eyevine
Contact eyevine for more information about using this image:
T: +44 (0) 20 8709 8709
E: info@eyevine.com
http://www.eyevine.com
(FOTO: DUKAS/EYEVINE)
Crown copyright. Licensed under the Open Government Licence -
DUKAS_182650653_EYE
Deputy Prime Minister Angela Rayner welcomes the First Deputy Prime Minister of Vietnam to Westminster
18/03/2025. London. The Deputy Prime Minister Angela Rayner welcomes the First Deputy Prime Minister of Vietnam, Nguy?n Hoà Bình, along with the ?Ambassador to the United Kingdom of Great Britain and Northern Ireland His Excellency Do Minh Hung, Vice Chairman of the Government Office Mai Thi Thu Van, Deputy Foreign Minister Le Thi Thu Hang and Deputy Minister of Ministry of Justice Nguyen Thanh Tinhto, to Westminster. Picture by Simon Walker / Deputy Prime Minister's Office / eyevine
Contact eyevine for more information about using this image:
T: +44 (0) 20 8709 8709
E: info@eyevine.com
http://www.eyevine.com
(FOTO: DUKAS/EYEVINE)
Crown copyright. Licensed under the Open Government Licence -
DUKAS_182650668_EYE
Deputy Prime Minister Angela Rayner welcomes the First Deputy Prime Minister of Vietnam to Westminster
18/03/2025. London. The Deputy Prime Minister Angela Rayner welcomes the First Deputy Prime Minister of Vietnam, Nguy?n Hoà Bình, along with the ?Ambassador to the United Kingdom of Great Britain and Northern Ireland His Excellency Do Minh Hung, Vice Chairman of the Government Office Mai Thi Thu Van, Deputy Foreign Minister Le Thi Thu Hang and Deputy Minister of Ministry of Justice Nguyen Thanh Tinhto, to Westminster. Picture by Simon Walker / Deputy Prime Minister's Office / eyevine
Contact eyevine for more information about using this image:
T: +44 (0) 20 8709 8709
E: info@eyevine.com
http://www.eyevine.com
(FOTO: DUKAS/EYEVINE)
Crown copyright. Licensed under the Open Government Licence -
DUKAS_182650669_EYE
Deputy Prime Minister Angela Rayner welcomes the First Deputy Prime Minister of Vietnam to Westminster
18/03/2025. London. The Deputy Prime Minister Angela Rayner welcomes the First Deputy Prime Minister of Vietnam, Nguy?n Hoà Bình, along with the ?Ambassador to the United Kingdom of Great Britain and Northern Ireland His Excellency Do Minh Hung, Vice Chairman of the Government Office Mai Thi Thu Van, Deputy Foreign Minister Le Thi Thu Hang and Deputy Minister of Ministry of Justice Nguyen Thanh Tinhto, to Westminster. Picture by Simon Walker / Deputy Prime Minister's Office / eyevine
Contact eyevine for more information about using this image:
T: +44 (0) 20 8709 8709
E: info@eyevine.com
http://www.eyevine.com
(FOTO: DUKAS/EYEVINE)
Crown copyright. Licensed under the Open Government Licence -
DUKAS_182650671_EYE
Deputy Prime Minister Angela Rayner welcomes the First Deputy Prime Minister of Vietnam to Westminster
18/03/2025. London. The Deputy Prime Minister Angela Rayner welcomes the First Deputy Prime Minister of Vietnam, Nguy?n Hoà Bình, along with the ?Ambassador to the United Kingdom of Great Britain and Northern Ireland His Excellency Do Minh Hung, Vice Chairman of the Government Office Mai Thi Thu Van, Deputy Foreign Minister Le Thi Thu Hang and Deputy Minister of Ministry of Justice Nguyen Thanh Tinhto, to Westminster. Picture by Simon Walker / Deputy Prime Minister's Office / eyevine
Contact eyevine for more information about using this image:
T: +44 (0) 20 8709 8709
E: info@eyevine.com
http://www.eyevine.com
(FOTO: DUKAS/EYEVINE)
Crown copyright. Licensed under the Open Government Licence -
DUKAS_182650650_EYE
Deputy Prime Minister Angela Rayner welcomes the First Deputy Prime Minister of Vietnam to Westminster
18/03/2025. London. The Deputy Prime Minister Angela Rayner welcomes the First Deputy Prime Minister of Vietnam, Nguy?n Hoà Bình, along with the ?Ambassador to the United Kingdom of Great Britain and Northern Ireland His Excellency Do Minh Hung, Vice Chairman of the Government Office Mai Thi Thu Van, Deputy Foreign Minister Le Thi Thu Hang and Deputy Minister of Ministry of Justice Nguyen Thanh Tinhto, to Westminster. Picture by Simon Walker / Deputy Prime Minister's Office / eyevine
Contact eyevine for more information about using this image:
T: +44 (0) 20 8709 8709
E: info@eyevine.com
http://www.eyevine.com
(FOTO: DUKAS/EYEVINE)
Crown copyright. Licensed under the Open Government Licence -
DUKAS_182650661_EYE
Deputy Prime Minister Angela Rayner welcomes the First Deputy Prime Minister of Vietnam to Westminster
18/03/2025. London. The Deputy Prime Minister Angela Rayner welcomes the First Deputy Prime Minister of Vietnam, Nguy?n Hoà Bình, along with the ?Ambassador to the United Kingdom of Great Britain and Northern Ireland His Excellency Do Minh Hung, Vice Chairman of the Government Office Mai Thi Thu Van, Deputy Foreign Minister Le Thi Thu Hang and Deputy Minister of Ministry of Justice Nguyen Thanh Tinhto, to Westminster. Picture by Simon Walker / Deputy Prime Minister's Office / eyevine
Contact eyevine for more information about using this image:
T: +44 (0) 20 8709 8709
E: info@eyevine.com
http://www.eyevine.com
(FOTO: DUKAS/EYEVINE)
Crown copyright. Licensed under the Open Government Licence -
DUKAS_182650670_EYE
Deputy Prime Minister Angela Rayner welcomes the First Deputy Prime Minister of Vietnam to Westminster
18/03/2025. London. The Deputy Prime Minister Angela Rayner welcomes the First Deputy Prime Minister of Vietnam, Nguy?n Hoà Bình, along with the ?Ambassador to the United Kingdom of Great Britain and Northern Ireland His Excellency Do Minh Hung, Vice Chairman of the Government Office Mai Thi Thu Van, Deputy Foreign Minister Le Thi Thu Hang and Deputy Minister of Ministry of Justice Nguyen Thanh Tinhto, to Westminster. Picture by Simon Walker / Deputy Prime Minister's Office / eyevine
Contact eyevine for more information about using this image:
T: +44 (0) 20 8709 8709
E: info@eyevine.com
http://www.eyevine.com
(FOTO: DUKAS/EYEVINE)
Crown copyright. Licensed under the Open Government Licence -
DUKAS_182650649_EYE
Deputy Prime Minister Angela Rayner welcomes the First Deputy Prime Minister of Vietnam to Westminster
18/03/2025. London. The Deputy Prime Minister Angela Rayner welcomes the First Deputy Prime Minister of Vietnam, Nguy?n Hoà Bình, along with the ?Ambassador to the United Kingdom of Great Britain and Northern Ireland His Excellency Do Minh Hung, Vice Chairman of the Government Office Mai Thi Thu Van, Deputy Foreign Minister Le Thi Thu Hang and Deputy Minister of Ministry of Justice Nguyen Thanh Tinhto, to Westminster. Picture by Simon Walker / Deputy Prime Minister's Office / eyevine
Contact eyevine for more information about using this image:
T: +44 (0) 20 8709 8709
E: info@eyevine.com
http://www.eyevine.com
(FOTO: DUKAS/EYEVINE)
Crown copyright. Licensed under the Open Government Licence -
DUKAS_182650672_EYE
Deputy Prime Minister Angela Rayner welcomes the First Deputy Prime Minister of Vietnam to Westminster
18/03/2025. London. The Deputy Prime Minister Angela Rayner welcomes the First Deputy Prime Minister of Vietnam, Nguy?n Hoà Bình, along with the ?Ambassador to the United Kingdom of Great Britain and Northern Ireland His Excellency Do Minh Hung, Vice Chairman of the Government Office Mai Thi Thu Van, Deputy Foreign Minister Le Thi Thu Hang and Deputy Minister of Ministry of Justice Nguyen Thanh Tinhto, to Westminster. Picture by Simon Walker / Deputy Prime Minister's Office / eyevine
Contact eyevine for more information about using this image:
T: +44 (0) 20 8709 8709
E: info@eyevine.com
http://www.eyevine.com
(FOTO: DUKAS/EYEVINE)
Crown copyright. Licensed under the Open Government Licence -
DUKAS_175148178_BES
Un inventeur a créé une soucoupe volante pour naviguer sur l'eau.
Pictures must credit: Thanh Che - Mr Ho An inventor has created a flying sauce — for skimming across the water. The mainly fibreglass vessel has automatic doors, light-up panels but only room for one person — the pilot. It can reportedly reach 50km/h the water. the water. The Vietnam based builder Tran Long Ho said the inspiration was a dream. It was created by first building up a model out of sand in the shape of the UFO's top section which was then covered with a thin layer of concrete. This created a hard shell mould which was then overlaid with sheets of fibreglass and epoxy. When the fibreglass set, Mr Ho and a team of helpers lifted up the structure and chipped away the concrete to leave a thin, light hull. The hull was then is reinforced with a fibreglass lattice before anther mould of sand and concrete was made for the bottom half where the water jet engine was installed. The doors are able to open and close remotely using a couple of small motors. Picture supplied by JLPPA
JLPPA / Bestimage -
DUKAS_175148176_BES
Un inventeur a créé une soucoupe volante pour naviguer sur l'eau.
Pictures must credit: Thanh Che - Mr Ho An inventor has created a flying sauce — for skimming across the water. The mainly fibreglass vessel has automatic doors, light-up panels but only room for one person — the pilot. It can reportedly reach 50km/h the water. the water. The Vietnam based builder Tran Long Ho said the inspiration was a dream. It was created by first building up a model out of sand in the shape of the UFO's top section which was then covered with a thin layer of concrete. This created a hard shell mould which was then overlaid with sheets of fibreglass and epoxy. When the fibreglass set, Mr Ho and a team of helpers lifted up the structure and chipped away the concrete to leave a thin, light hull. The hull was then is reinforced with a fibreglass lattice before anther mould of sand and concrete was made for the bottom half where the water jet engine was installed. The doors are able to open and close remotely using a couple of small motors. Picture supplied by JLPPA
JLPPA / Bestimage -
DUKAS_175148172_BES
Un inventeur a créé une soucoupe volante pour naviguer sur l'eau.
Pictures must credit: Thanh Che - Mr Ho An inventor has created a flying sauce — for skimming across the water. The mainly fibreglass vessel has automatic doors, light-up panels but only room for one person — the pilot. It can reportedly reach 50km/h the water. the water. The Vietnam based builder Tran Long Ho said the inspiration was a dream. It was created by first building up a model out of sand in the shape of the UFO's top section which was then covered with a thin layer of concrete. This created a hard shell mould which was then overlaid with sheets of fibreglass and epoxy. When the fibreglass set, Mr Ho and a team of helpers lifted up the structure and chipped away the concrete to leave a thin, light hull. The hull was then is reinforced with a fibreglass lattice before anther mould of sand and concrete was made for the bottom half where the water jet engine was installed. The doors are able to open and close remotely using a couple of small motors. Picture supplied by JLPPA
JLPPA / Bestimage -
DUKAS_175148168_BES
Un inventeur a créé une soucoupe volante pour naviguer sur l'eau.
Pictures must credit: Thanh Che - Mr Ho An inventor has created a flying sauce — for skimming across the water. The mainly fibreglass vessel has automatic doors, light-up panels but only room for one person — the pilot. It can reportedly reach 50km/h the water. the water. The Vietnam based builder Tran Long Ho said the inspiration was a dream. It was created by first building up a model out of sand in the shape of the UFO's top section which was then covered with a thin layer of concrete. This created a hard shell mould which was then overlaid with sheets of fibreglass and epoxy. When the fibreglass set, Mr Ho and a team of helpers lifted up the structure and chipped away the concrete to leave a thin, light hull. The hull was then is reinforced with a fibreglass lattice before anther mould of sand and concrete was made for the bottom half where the water jet engine was installed. The doors are able to open and close remotely using a couple of small motors. Picture supplied by JLPPA
JLPPA / Bestimage -
DUKAS_175148165_BES
Un inventeur a créé une soucoupe volante pour naviguer sur l'eau.
Pictures must credit: Thanh Che - Mr Ho An inventor has created a flying sauce — for skimming across the water. The mainly fibreglass vessel has automatic doors, light-up panels but only room for one person — the pilot. It can reportedly reach 50km/h the water. the water. The Vietnam based builder Tran Long Ho said the inspiration was a dream. It was created by first building up a model out of sand in the shape of the UFO's top section which was then covered with a thin layer of concrete. This created a hard shell mould which was then overlaid with sheets of fibreglass and epoxy. When the fibreglass set, Mr Ho and a team of helpers lifted up the structure and chipped away the concrete to leave a thin, light hull. The hull was then is reinforced with a fibreglass lattice before anther mould of sand and concrete was made for the bottom half where the water jet engine was installed. The doors are able to open and close remotely using a couple of small motors. Picture supplied by JLPPA
JLPPA / Bestimage -
DUKAS_175148163_BES
Un inventeur a créé une soucoupe volante pour naviguer sur l'eau.
Pictures must credit: Thanh Che - Mr Ho An inventor has created a flying sauce — for skimming across the water. The mainly fibreglass vessel has automatic doors, light-up panels but only room for one person — the pilot. It can reportedly reach 50km/h the water. the water. The Vietnam based builder Tran Long Ho said the inspiration was a dream. It was created by first building up a model out of sand in the shape of the UFO's top section which was then covered with a thin layer of concrete. This created a hard shell mould which was then overlaid with sheets of fibreglass and epoxy. When the fibreglass set, Mr Ho and a team of helpers lifted up the structure and chipped away the concrete to leave a thin, light hull. The hull was then is reinforced with a fibreglass lattice before anther mould of sand and concrete was made for the bottom half where the water jet engine was installed. The doors are able to open and close remotely using a couple of small motors. Picture supplied by JLPPA
JLPPA / Bestimage -
DUKAS_175148161_BES
Un inventeur a créé une soucoupe volante pour naviguer sur l'eau.
Pictures must credit: Thanh Che - Mr Ho An inventor has created a flying sauce — for skimming across the water. The mainly fibreglass vessel has automatic doors, light-up panels but only room for one person — the pilot. It can reportedly reach 50km/h the water. the water. The Vietnam based builder Tran Long Ho said the inspiration was a dream. It was created by first building up a model out of sand in the shape of the UFO's top section which was then covered with a thin layer of concrete. This created a hard shell mould which was then overlaid with sheets of fibreglass and epoxy. When the fibreglass set, Mr Ho and a team of helpers lifted up the structure and chipped away the concrete to leave a thin, light hull. The hull was then is reinforced with a fibreglass lattice before anther mould of sand and concrete was made for the bottom half where the water jet engine was installed. The doors are able to open and close remotely using a couple of small motors. Picture supplied by JLPPA
JLPPA / Bestimage -
DUKAS_175148159_BES
Un inventeur a créé une soucoupe volante pour naviguer sur l'eau.
Pictures must credit: Thanh Che - Mr Ho An inventor has created a flying sauce — for skimming across the water. The mainly fibreglass vessel has automatic doors, light-up panels but only room for one person — the pilot. It can reportedly reach 50km/h the water. the water. The Vietnam based builder Tran Long Ho said the inspiration was a dream. It was created by first building up a model out of sand in the shape of the UFO's top section which was then covered with a thin layer of concrete. This created a hard shell mould which was then overlaid with sheets of fibreglass and epoxy. When the fibreglass set, Mr Ho and a team of helpers lifted up the structure and chipped away the concrete to leave a thin, light hull. The hull was then is reinforced with a fibreglass lattice before anther mould of sand and concrete was made for the bottom half where the water jet engine was installed. The doors are able to open and close remotely using a couple of small motors. Picture supplied by JLPPA
JLPPA / Bestimage -
DUKAS_175148157_BES
Un inventeur a créé une soucoupe volante pour naviguer sur l'eau.
Pictures must credit: Thanh Che - Mr Ho An inventor has created a flying sauce — for skimming across the water. The mainly fibreglass vessel has automatic doors, light-up panels but only room for one person — the pilot. It can reportedly reach 50km/h the water. the water. The Vietnam based builder Tran Long Ho said the inspiration was a dream. It was created by first building up a model out of sand in the shape of the UFO's top section which was then covered with a thin layer of concrete. This created a hard shell mould which was then overlaid with sheets of fibreglass and epoxy. When the fibreglass set, Mr Ho and a team of helpers lifted up the structure and chipped away the concrete to leave a thin, light hull. The hull was then is reinforced with a fibreglass lattice before anther mould of sand and concrete was made for the bottom half where the water jet engine was installed. The doors are able to open and close remotely using a couple of small motors. Picture supplied by JLPPA
JLPPA / Bestimage -
DUKAS_175148155_BES
Un inventeur a créé une soucoupe volante pour naviguer sur l'eau.
Pictures must credit: Thanh Che - Mr Ho An inventor has created a flying sauce — for skimming across the water. The mainly fibreglass vessel has automatic doors, light-up panels but only room for one person — the pilot. It can reportedly reach 50km/h the water. the water. The Vietnam based builder Tran Long Ho said the inspiration was a dream. It was created by first building up a model out of sand in the shape of the UFO's top section which was then covered with a thin layer of concrete. This created a hard shell mould which was then overlaid with sheets of fibreglass and epoxy. When the fibreglass set, Mr Ho and a team of helpers lifted up the structure and chipped away the concrete to leave a thin, light hull. The hull was then is reinforced with a fibreglass lattice before anther mould of sand and concrete was made for the bottom half where the water jet engine was installed. The doors are able to open and close remotely using a couple of small motors. Picture supplied by JLPPA
JLPPA / Bestimage -
DUKAS_175148153_BES
Un inventeur a créé une soucoupe volante pour naviguer sur l'eau.
Pictures must credit: Thanh Che - Mr Ho An inventor has created a flying sauce — for skimming across the water. The mainly fibreglass vessel has automatic doors, light-up panels but only room for one person — the pilot. It can reportedly reach 50km/h the water. the water. The Vietnam based builder Tran Long Ho said the inspiration was a dream. It was created by first building up a model out of sand in the shape of the UFO's top section which was then covered with a thin layer of concrete. This created a hard shell mould which was then overlaid with sheets of fibreglass and epoxy. When the fibreglass set, Mr Ho and a team of helpers lifted up the structure and chipped away the concrete to leave a thin, light hull. The hull was then is reinforced with a fibreglass lattice before anther mould of sand and concrete was made for the bottom half where the water jet engine was installed. The doors are able to open and close remotely using a couple of small motors. Picture supplied by JLPPA
JLPPA / Bestimage -
DUKAS_175148151_BES
Un inventeur a créé une soucoupe volante pour naviguer sur l'eau.
Pictures must credit: Thanh Che - Mr Ho An inventor has created a flying sauce — for skimming across the water. The mainly fibreglass vessel has automatic doors, light-up panels but only room for one person — the pilot. It can reportedly reach 50km/h the water. the water. The Vietnam based builder Tran Long Ho said the inspiration was a dream. It was created by first building up a model out of sand in the shape of the UFO's top section which was then covered with a thin layer of concrete. This created a hard shell mould which was then overlaid with sheets of fibreglass and epoxy. When the fibreglass set, Mr Ho and a team of helpers lifted up the structure and chipped away the concrete to leave a thin, light hull. The hull was then is reinforced with a fibreglass lattice before anther mould of sand and concrete was made for the bottom half where the water jet engine was installed. The doors are able to open and close remotely using a couple of small motors. Picture supplied by JLPPA
JLPPA / Bestimage -
DUKAS_175148149_BES
Un inventeur a créé une soucoupe volante pour naviguer sur l'eau.
Pictures must credit: Thanh Che - Mr Ho An inventor has created a flying sauce — for skimming across the water. The mainly fibreglass vessel has automatic doors, light-up panels but only room for one person — the pilot. It can reportedly reach 50km/h the water. the water. The Vietnam based builder Tran Long Ho said the inspiration was a dream. It was created by first building up a model out of sand in the shape of the UFO's top section which was then covered with a thin layer of concrete. This created a hard shell mould which was then overlaid with sheets of fibreglass and epoxy. When the fibreglass set, Mr Ho and a team of helpers lifted up the structure and chipped away the concrete to leave a thin, light hull. The hull was then is reinforced with a fibreglass lattice before anther mould of sand and concrete was made for the bottom half where the water jet engine was installed. The doors are able to open and close remotely using a couple of small motors. Picture supplied by JLPPA
JLPPA / Bestimage -
DUKAS_175148147_BES
Un inventeur a créé une soucoupe volante pour naviguer sur l'eau.
Pictures must credit: Thanh Che - Mr Ho An inventor has created a flying sauce — for skimming across the water. The mainly fibreglass vessel has automatic doors, light-up panels but only room for one person — the pilot. It can reportedly reach 50km/h the water. the water. The Vietnam based builder Tran Long Ho said the inspiration was a dream. It was created by first building up a model out of sand in the shape of the UFO's top section which was then covered with a thin layer of concrete. This created a hard shell mould which was then overlaid with sheets of fibreglass and epoxy. When the fibreglass set, Mr Ho and a team of helpers lifted up the structure and chipped away the concrete to leave a thin, light hull. The hull was then is reinforced with a fibreglass lattice before anther mould of sand and concrete was made for the bottom half where the water jet engine was installed. The doors are able to open and close remotely using a couple of small motors. Picture supplied by JLPPA
JLPPA / Bestimage -
DUKAS_175148144_BES
Un inventeur a créé une soucoupe volante pour naviguer sur l'eau.
Pictures must credit: Thanh Che - Mr Ho An inventor has created a flying sauce — for skimming across the water. The mainly fibreglass vessel has automatic doors, light-up panels but only room for one person — the pilot. It can reportedly reach 50km/h the water. the water. The Vietnam based builder Tran Long Ho said the inspiration was a dream. It was created by first building up a model out of sand in the shape of the UFO's top section which was then covered with a thin layer of concrete. This created a hard shell mould which was then overlaid with sheets of fibreglass and epoxy. When the fibreglass set, Mr Ho and a team of helpers lifted up the structure and chipped away the concrete to leave a thin, light hull. The hull was then is reinforced with a fibreglass lattice before anther mould of sand and concrete was made for the bottom half where the water jet engine was installed. The doors are able to open and close remotely using a couple of small motors. Picture supplied by JLPPA
JLPPA / Bestimage -
DUKAS_175148142_BES
Un inventeur a créé une soucoupe volante pour naviguer sur l'eau.
Pictures must credit: Thanh Che - Mr Ho An inventor has created a flying sauce — for skimming across the water. The mainly fibreglass vessel has automatic doors, light-up panels but only room for one person — the pilot. It can reportedly reach 50km/h the water. the water. The Vietnam based builder Tran Long Ho said the inspiration was a dream. It was created by first building up a model out of sand in the shape of the UFO's top section which was then covered with a thin layer of concrete. This created a hard shell mould which was then overlaid with sheets of fibreglass and epoxy. When the fibreglass set, Mr Ho and a team of helpers lifted up the structure and chipped away the concrete to leave a thin, light hull. The hull was then is reinforced with a fibreglass lattice before anther mould of sand and concrete was made for the bottom half where the water jet engine was installed. The doors are able to open and close remotely using a couple of small motors. Picture supplied by JLPPA
JLPPA / Bestimage -
DUKAS_175148139_BES
Un inventeur a créé une soucoupe volante pour naviguer sur l'eau.
Pictures must credit: Thanh Che - Mr Ho An inventor has created a flying sauce — for skimming across the water. The mainly fibreglass vessel has automatic doors, light-up panels but only room for one person — the pilot. It can reportedly reach 50km/h the water. the water. The Vietnam based builder Tran Long Ho said the inspiration was a dream. It was created by first building up a model out of sand in the shape of the UFO's top section which was then covered with a thin layer of concrete. This created a hard shell mould which was then overlaid with sheets of fibreglass and epoxy. When the fibreglass set, Mr Ho and a team of helpers lifted up the structure and chipped away the concrete to leave a thin, light hull. The hull was then is reinforced with a fibreglass lattice before anther mould of sand and concrete was made for the bottom half where the water jet engine was installed. The doors are able to open and close remotely using a couple of small motors. Picture supplied by JLPPA
JLPPA / Bestimage -
DUKAS_175148138_BES
Un inventeur a créé une soucoupe volante pour naviguer sur l'eau.
Pictures must credit: Thanh Che - Mr Ho An inventor has created a flying sauce — for skimming across the water. The mainly fibreglass vessel has automatic doors, light-up panels but only room for one person — the pilot. It can reportedly reach 50km/h the water. the water. The Vietnam based builder Tran Long Ho said the inspiration was a dream. It was created by first building up a model out of sand in the shape of the UFO's top section which was then covered with a thin layer of concrete. This created a hard shell mould which was then overlaid with sheets of fibreglass and epoxy. When the fibreglass set, Mr Ho and a team of helpers lifted up the structure and chipped away the concrete to leave a thin, light hull. The hull was then is reinforced with a fibreglass lattice before anther mould of sand and concrete was made for the bottom half where the water jet engine was installed. The doors are able to open and close remotely using a couple of small motors. Picture supplied by JLPPA
JLPPA / Bestimage -
DUKAS_175148137_BES
Un inventeur a créé une soucoupe volante pour naviguer sur l'eau.
Pictures must credit: Thanh Che - Mr Ho An inventor has created a flying sauce — for skimming across the water. The mainly fibreglass vessel has automatic doors, light-up panels but only room for one person — the pilot. It can reportedly reach 50km/h the water. the water. The Vietnam based builder Tran Long Ho said the inspiration was a dream. It was created by first building up a model out of sand in the shape of the UFO's top section which was then covered with a thin layer of concrete. This created a hard shell mould which was then overlaid with sheets of fibreglass and epoxy. When the fibreglass set, Mr Ho and a team of helpers lifted up the structure and chipped away the concrete to leave a thin, light hull. The hull was then is reinforced with a fibreglass lattice before anther mould of sand and concrete was made for the bottom half where the water jet engine was installed. The doors are able to open and close remotely using a couple of small motors. Picture supplied by JLPPA
JLPPA / Bestimage -
DUKAS_175148136_BES
Un inventeur a créé une soucoupe volante pour naviguer sur l'eau.
Pictures must credit: Thanh Che - Mr Ho An inventor has created a flying sauce — for skimming across the water. The mainly fibreglass vessel has automatic doors, light-up panels but only room for one person — the pilot. It can reportedly reach 50km/h the water. the water. The Vietnam based builder Tran Long Ho said the inspiration was a dream. It was created by first building up a model out of sand in the shape of the UFO's top section which was then covered with a thin layer of concrete. This created a hard shell mould which was then overlaid with sheets of fibreglass and epoxy. When the fibreglass set, Mr Ho and a team of helpers lifted up the structure and chipped away the concrete to leave a thin, light hull. The hull was then is reinforced with a fibreglass lattice before anther mould of sand and concrete was made for the bottom half where the water jet engine was installed. The doors are able to open and close remotely using a couple of small motors. Picture supplied by JLPPA
JLPPA / Bestimage -
DUKAS_175148135_BES
Un inventeur a créé une soucoupe volante pour naviguer sur l'eau.
Pictures must credit: Thanh Che - Mr Ho An inventor has created a flying sauce — for skimming across the water. The mainly fibreglass vessel has automatic doors, light-up panels but only room for one person — the pilot. It can reportedly reach 50km/h the water. the water. The Vietnam based builder Tran Long Ho said the inspiration was a dream. It was created by first building up a model out of sand in the shape of the UFO's top section which was then covered with a thin layer of concrete. This created a hard shell mould which was then overlaid with sheets of fibreglass and epoxy. When the fibreglass set, Mr Ho and a team of helpers lifted up the structure and chipped away the concrete to leave a thin, light hull. The hull was then is reinforced with a fibreglass lattice before anther mould of sand and concrete was made for the bottom half where the water jet engine was installed. The doors are able to open and close remotely using a couple of small motors. Picture supplied by JLPPA
JLPPA / Bestimage -
DUKAS_175148134_BES
Un inventeur a créé une soucoupe volante pour naviguer sur l'eau.
Pictures must credit: Thanh Che - Mr Ho An inventor has created a flying sauce — for skimming across the water. The mainly fibreglass vessel has automatic doors, light-up panels but only room for one person — the pilot. It can reportedly reach 50km/h the water. the water. The Vietnam based builder Tran Long Ho said the inspiration was a dream. It was created by first building up a model out of sand in the shape of the UFO's top section which was then covered with a thin layer of concrete. This created a hard shell mould which was then overlaid with sheets of fibreglass and epoxy. When the fibreglass set, Mr Ho and a team of helpers lifted up the structure and chipped away the concrete to leave a thin, light hull. The hull was then is reinforced with a fibreglass lattice before anther mould of sand and concrete was made for the bottom half where the water jet engine was installed. The doors are able to open and close remotely using a couple of small motors. Picture supplied by JLPPA
JLPPA / Bestimage -
DUKAS_175148133_BES
Un inventeur a créé une soucoupe volante pour naviguer sur l'eau.
Pictures must credit: Thanh Che - Mr Ho An inventor has created a flying sauce — for skimming across the water. The mainly fibreglass vessel has automatic doors, light-up panels but only room for one person — the pilot. It can reportedly reach 50km/h the water. the water. The Vietnam based builder Tran Long Ho said the inspiration was a dream. It was created by first building up a model out of sand in the shape of the UFO's top section which was then covered with a thin layer of concrete. This created a hard shell mould which was then overlaid with sheets of fibreglass and epoxy. When the fibreglass set, Mr Ho and a team of helpers lifted up the structure and chipped away the concrete to leave a thin, light hull. The hull was then is reinforced with a fibreglass lattice before anther mould of sand and concrete was made for the bottom half where the water jet engine was installed. The doors are able to open and close remotely using a couple of small motors. Picture supplied by JLPPA
JLPPA / Bestimage -
DUKAS_175148132_BES
Un inventeur a créé une soucoupe volante pour naviguer sur l'eau.
Pictures must credit: Thanh Che - Mr Ho An inventor has created a flying sauce — for skimming across the water. The mainly fibreglass vessel has automatic doors, light-up panels but only room for one person — the pilot. It can reportedly reach 50km/h the water. the water. The Vietnam based builder Tran Long Ho said the inspiration was a dream. It was created by first building up a model out of sand in the shape of the UFO's top section which was then covered with a thin layer of concrete. This created a hard shell mould which was then overlaid with sheets of fibreglass and epoxy. When the fibreglass set, Mr Ho and a team of helpers lifted up the structure and chipped away the concrete to leave a thin, light hull. The hull was then is reinforced with a fibreglass lattice before anther mould of sand and concrete was made for the bottom half where the water jet engine was installed. The doors are able to open and close remotely using a couple of small motors. Picture supplied by JLPPA
JLPPA / Bestimage -
DUKAS_175148131_BES
Un inventeur a créé une soucoupe volante pour naviguer sur l'eau.
Pictures must credit: Thanh Che - Mr Ho An inventor has created a flying sauce — for skimming across the water. The mainly fibreglass vessel has automatic doors, light-up panels but only room for one person — the pilot. It can reportedly reach 50km/h the water. the water. The Vietnam based builder Tran Long Ho said the inspiration was a dream. It was created by first building up a model out of sand in the shape of the UFO's top section which was then covered with a thin layer of concrete. This created a hard shell mould which was then overlaid with sheets of fibreglass and epoxy. When the fibreglass set, Mr Ho and a team of helpers lifted up the structure and chipped away the concrete to leave a thin, light hull. The hull was then is reinforced with a fibreglass lattice before anther mould of sand and concrete was made for the bottom half where the water jet engine was installed. The doors are able to open and close remotely using a couple of small motors. Picture supplied by JLPPA
JLPPA / Bestimage -
DUKAS_175148130_BES
Un inventeur a créé une soucoupe volante pour naviguer sur l'eau.
Pictures must credit: Thanh Che - Mr Ho An inventor has created a flying sauce — for skimming across the water. The mainly fibreglass vessel has automatic doors, light-up panels but only room for one person — the pilot. It can reportedly reach 50km/h the water. the water. The Vietnam based builder Tran Long Ho said the inspiration was a dream. It was created by first building up a model out of sand in the shape of the UFO's top section which was then covered with a thin layer of concrete. This created a hard shell mould which was then overlaid with sheets of fibreglass and epoxy. When the fibreglass set, Mr Ho and a team of helpers lifted up the structure and chipped away the concrete to leave a thin, light hull. The hull was then is reinforced with a fibreglass lattice before anther mould of sand and concrete was made for the bottom half where the water jet engine was installed. The doors are able to open and close remotely using a couple of small motors. Picture supplied by JLPPA
JLPPA / Bestimage -
DUKAS_170240180_DAL
LSD
La Souris Déglinguée - avec Taï Luc au centre à la guitare (chanteur guitariste et créateur du groupe) - Concert à l'Elysée Montmartre - Paris - Février 1992
© François Poulain- DALLE (FOTO: DUKAS/DALLE) --- NO WEB USAGE ---
©DALLE aprf -
DUK10160033_017
FEATURE - Hanoi Train Street im alten Viertel in Hanoi, Vietnam
Hanoi Train Street in the Old Quarter in Hanoi, Vietnam., Credit:Euan Cherry / Avalon
(c) Dukas -
DUK10160033_016
FEATURE - Hanoi Train Street im alten Viertel in Hanoi, Vietnam
Hanoi Train Street in the Old Quarter in Hanoi, Vietnam., Credit:Euan Cherry / Avalon
(c) Dukas -
DUK10160033_015
FEATURE - Hanoi Train Street im alten Viertel in Hanoi, Vietnam
Hanoi Train Street in the Old Quarter in Hanoi, Vietnam., Credit:Euan Cherry / Avalon
(c) Dukas -
DUK10160033_026
FEATURE - Hanoi Train Street im alten Viertel in Hanoi, Vietnam
Hanoi Train Street in the Old Quarter in Hanoi, Vietnam., Credit:Euan Cherry / Avalon
(c) Dukas -
DUK10160033_025
FEATURE - Hanoi Train Street im alten Viertel in Hanoi, Vietnam
Hanoi Train Street in the Old Quarter in Hanoi, Vietnam., Credit:Euan Cherry / Avalon
(c) Dukas -
DUK10160033_024
FEATURE - Hanoi Train Street im alten Viertel in Hanoi, Vietnam
Hanoi Train Street in the Old Quarter in Hanoi, Vietnam., Credit:Euan Cherry / Avalon
(c) Dukas -
DUK10160033_023
FEATURE - Hanoi Train Street im alten Viertel in Hanoi, Vietnam
Hanoi Train Street in the Old Quarter in Hanoi, Vietnam., Credit:Euan Cherry / Avalon
(c) Dukas -
DUK10160033_022
FEATURE - Hanoi Train Street im alten Viertel in Hanoi, Vietnam
Hanoi Train Street in the Old Quarter in Hanoi, Vietnam., Credit:Euan Cherry / Avalon
(c) Dukas -
